<ol id="9rndh"></ol>

    <dl id="9rndh"></dl>

    <address id="9rndh"><big id="9rndh"><th id="9rndh"></th></big></address>

            <noframes id="9rndh">

            Welcome to visit Beijing Beihua New Rubber Special Material Technology Co., Ltd.官網網站!

            phone

            010-64442309

            address:Room 215, North Anhua Building, No. 8 Yinghua West Street, Chaoyang District, Beijing

            fax:+86-010-64439746-801
            電話:+86 13810696297(綜合業務部經理 賀磊) 

            Filing number application

            技術支持

            產品名稱

            Two-component thermal gel

            沒有此類產品
            產品描述

            This type of product is a two-component liquid gap-filling thermal conductive material. The A/B components are mixed according to 1/1 and then are glued or poured into the interface that needs heat dissipation. The compressive stress during installation is very low, and right? Flat surfaces or irregular cavities have excellent structural applicability and surface conformability characteristics of structural parts, and gaps are fully filled. The mixed product is cured into a soft elastomer material at room temperature, and the curing can be accelerated under high temperature conditions. The product is composed of organic silicon polymer and high thermal conductivity ceramic filler, without any metal filler, providing excellent thermal conductivity, low thermal resistance and good electrical insulation performance.


             constitute

            ? Silicone gel

            ? Ceramic filler

             

            性能

            單位

            2021

            2035

            測試方法

            顏色,A組份

            /

            白色

            紅色

            目測

            顏色,B組份

            /

            藍色

            白色

            目測

            混合比例,A/B

            /

            1:1

            1:1

            /

            混合后的粘度(1),cps

            cps

            200,000

            300,000

            /

            操作時間, 25, min

            min

            60

            60

            /

            固化時間, 25, hour

            hour

            12

            12

            /

            固化時間, 100, min

            min

            30

            30

            /

            密度

            g/cm3

            2.8

            3.1

            ASTM D792

            典型的最小界面厚度

            mm

            0.1

            0.1

            /

            導熱系數

            W/m·K

            2.3

            3.5

            ASTM D5470

            固化后硬度, Shore OO

            /

            40

            40

            ASTM D2240

            工作溫度范圍

            -55~200

            -55~200

            /

            絕緣強度

            VAC/mm

            >6000

            >6000

            ASTM D149

            體積電阻率

            Ω·cm

            >1013

            >1013

            ASTM D257

            UL94阻燃等級

            /

            V-0

            V-0

            UL 94

            RoHS標準

            /

            符合

            符合

            /

            除氣測試

            TML

            %

            <0.5

            <0.5

            ASTM E595

            CVCM

            %

            <0.1

            <0.1

            保存期

            6

            6

            /

            1) Brookfield rotational viscometer measured at 20 rpm and 25°C

             

            Ordering Information

            BH-TXXXX-YY-ZZZZ

            BH-T

            XXXX-

            YY-

            ZZZZ


            產品編碼

            2021

            2035

            00:膠筒

            11:罐裝或桶裝

            0120:50CC雙組份膠筒,組份A 60克,組份B 60克

            1000:400CC雙組份膠筒,組份A 500克,組份B 500克

            0002:2KG罐裝,組份A 1公斤,組份B   1公斤

            其它的客戶指定包裝


             

            未找到相應參數組,請于后臺屬性模板中添加
            暫未實現,敬請期待
            暫未實現,敬請期待

            Product Center

            ·   
            无码精品日韩专区第一页,97se亚洲综合自在线,高清无码在线观看,欧美另类小说偷拍激情,伊人色综合视频一区二区三区