<ol id="9rndh"></ol>

    <dl id="9rndh"></dl>

    <address id="9rndh"><big id="9rndh"><th id="9rndh"></th></big></address>

            <noframes id="9rndh">

            Welcome to visit Beijing Beihua New Rubber Special Material Technology Co., Ltd.官網網站!

            phone

            010-64442309

            address:Room 215, North Anhua Building, No. 8 Yinghua West Street, Chaoyang District, Beijing

            fax:+86-010-64439746-801
            電話:+86 13810696297(綜合業務部經理 賀磊) 

            Filing number application

            技術支持

            >
            >
            >
            Easy to rework one-component thermal gel BH-T1110/1120
            產品名稱

            Easy to rework one-component thermal gel BH-T1110/1120

            沒有此類產品
            產品描述

            Easy-to-rework thermally conductive gel is a one-component room temperature curing thermally conductive material. It is cured in the presence of moisture to produce durable, relatively low-stress elastomers and non-corrosive by-products. The product does not need to be mixed when used, and is applied by dispensing. It can achieve a very small interface thickness (<50μm) under very low pressure, providing excellent thermal conductivity and low thermal resistance, and maintaining good long-term reliability. The cured product can be easily peeled off the substrate during rework.


             constitute

            ? Polymer

            ? Ceramic filler


             QQ圖片20200512161512.png

             

             

            性能

            單位

            1110

            1120

            測試方法

            顏色

            /

            白色

            淺紅色

            目測

            點膠速率, 30毫升針筒, 90psi

            g/min

            25

            25

            /

            密度

            g/cm3

            2.5

            2.8

            ASTM D792

            低分子量硅氧烷含量(D4-D20)

            ppm

            0

            0

            GC-MS

            典型的最小界面厚度

            mm

            0.05

            0.1

            /

            導熱系數

            W/m·K

            1.5

            2.0

            ASTM D5470

            23°C/50%RH表面硬化時間

            min

            15

            20

            ASTM C679

            24小時硬化深度 (at   23°C, 50%RH)

            mm

            3

            3

            /

            固化后硬度, Shore A

            /

            50

            60

            ASTM D2240

            固化后拉伸強度

            MPa

            3.0

            3.0

            ASTM D412

            固化后拉斷伸長率

            %

            100

            50

            ASTM D412

            PCB基板上返工, 徒手剝離實驗

            /

            易剝離

            易剝離

            /

            工作溫度范圍

            -55~110

            -55~110

            /

            絕緣強度

            VAC/mm

            >6000

            >6000

            ASTM D149

            體積電阻率

            Ω·cm

            >1013

            >1013

            ASTM D257

            UL94阻燃等級

            /

            V-0

            V-0

            UL 94

            RoHS標準

            /

            符合

            符合

            /

            除氣測試

            TML

            %

            <0.5

            <0.5

            ASTM E595

            CVCM

            %

            <0.1

            <0.1

            保存期

            6

            6

            /

             

             

            易返工單組份導熱凝膠的包裝和訂購信息

            BH-TXXXX-YY-ZZZZ

            BH-T

            XXXX-

            YY-

            ZZZZ


            產品編碼

            1110

            1120

            00:膠筒

            11:桶裝

            0060:30CC點膠筒包裝,60克

            0120:55CC點膠筒包裝,120克

            0360:180CC點膠筒包裝,360克

            0600:300CC點膠筒包裝,600克

            其它的客戶指定包裝


             

            未找到相應參數組,請于后臺屬性模板中添加
            暫未實現,敬請期待
            暫未實現,敬請期待

            Product Center

            ·   
            无码精品日韩专区第一页,97se亚洲综合自在线,高清无码在线观看,欧美另类小说偷拍激情,伊人色综合视频一区二区三区